Skip to main content
This guide walks you through installing the Primo MDM agent. The installation takes less than 2 minutes and requires no technical skills.
You must have administrator rights on the device to complete the installation. If you do not, contact your IT team.

​
Enroll your device

1

Access the enrollment page

  • From the invitation email: open the email titled “Invite to join <Company> on Primo” and click Enroll my computer on Primo.
  • From a direct link: open the link shared by your IT team — you’ll land directly on the enrollment page.
2

Authenticate

Enter your professional email address (or personal email if you’re new and don’t have one yet), then enter the 6-digit verification code sent to that address.
3

Install the agent

After signing in, Primo will guide you through installation for your operating system.If a device is already assigned to you, select it and click Enroll. Otherwise, click Deploy MDM on another device and select your OS.macOS
  1. Download and open primo-enrollment.mobileconfig.
  2. Open System Settings > General > Device Management.
  3. Select the profile and click Enroll, then enter your administrator password.
If the installer is blocked, go to System Settings > Privacy & Security and click Open Anyway.
Windows
  1. Double-click primo-enrollment.msi.
  2. Click Yes in the security prompt.
Linux
  1. Download the enrollment package for your distribution.
  2. Run the installer using your package manager or the provided shell script.
iOS / iPadOS
  1. Open the enrollment link on your device.
  2. Go to Settings > General > Device Management.
  3. Select and install the MDM Primo profile.
AndroidAndroid offers two enrollment modes. Pick the one your IT team told you to use:
  • Personal (work profile) — for a personal device. Company apps and data stay in a separate work profile; your personal data stays private.
    1. Open the Personal (work profile) enrollment link on your Android device, or scan the QR code shown next to it.
    2. Tap Enroll and follow the on-screen steps to create the work profile.
  • Company-owned (fully managed) — for a new or factory-reset company device. Primo manages the whole device.
    1. Open the Company-owned (fully managed) link on a computer or tablet. A provisioning QR code appears — keep it open.
    2. Factory-reset the Android device and power it on. Stop on the welcome screen.
    3. Tap the welcome screen 6 times to open the QR code scanner, then scan the provisioning QR code from step 1.
Once the agent is installed, you’ll receive a confirmation email and your device will appear in the Primo dashboard.

​
FAQ

​
How long does installation take?

Less than 2 minutes from start to finish.

​
Will MDM slow down my device?

The Fleet agent is lightweight and designed for minimal performance impact. If you notice slowdowns after enrollment, contact your IT team.

​
Can Primo see my personal files or browsing history?

No. The MDM does not access documents, browser history, messages, or personal app data. It only collects device metadata — OS version, installed app names, and compliance status.

​
My device is asking me to change my password but won’t let me

This is a known macOS issue that can occur after installing MDM on a device with an active password policy. Restart your computer — the password change will work correctly after the reboot.

​
My Mac says it’s already managed by an MDM

Check whether the installed profile is named Primo Enrollment or <Company> Enrollment. If so, the device may already be enrolled — confirm with your IT team. If it’s a different profile, ask your IT team for the procedure to remove the existing MDM before installing Primo.

​
I used my personal email — is that a problem?

No. Using your personal email for authentication has no impact on enrollment.

​
The installer download is blocked by the browser

Allow the download in your browser’s security settings, or ask your IT team for an alternative method.

​
The enrollment page shows an error

Make sure you’re using the correct email address and that your 6-digit code hasn’t expired (codes are valid for 10 minutes). Request a new code if needed.

​
The device doesn’t appear in the dashboard after installation

Wait a few minutes — enrollment can take up to 5 minutes after the agent is installed. If the device still doesn’t appear, contact your IT team.

​
Who do I contact if something goes wrong?

Contact your IT team – Primo Support is only for company admins.